Decoding Assessment Validation: Guide to Validating Assessments
Decoding Assessment Validation: Guide to Validating Assessments
Blog Article
RTOs have numerous responsibilities post-registration, including annual declarations, AVETMISS reporting, and ensuring marketing compliance. Among these tasks, validation often stands out as particularly challenging.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.
As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards necessitate conducting two types of validation.
The primary validation type ensures compliance with the training package requirements for your RTO's assessments.
The second type of validation verifies assessments are conducted according to the principles of assessment and rules of evidence.
Thus, we understand that validation is done before and after the assessment. This article highlights the first type: assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
Defining Assessment Validation
As previously discussed in our blogs, validation involves two processes: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.
Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
In this write-up, we will focus on assessment tool validation.
Methods for Conducting Assessment Tool Validation
Having reviewed the two types of validation, let’s dive into the specifics of assessment tool validation.
When Should You Conduct Assessment Tool Validation?
The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.
Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:
- your resources get updated
- your new training products get added on scope
- reviewing your course against training product updates
- learning resources get identified as a risk during your risk assessment
ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.
Identifying Training Products for Validation
Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.
What You Need for Assessment Tool Validation
Course Materials
As you validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.
Learner/student workbook – check its suitability for use as an assessment tool. Verify clear instructions and sufficient answer fields. This is often a gap.
Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – such as checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are suitable for the assessment task and address unit requirements.
Validation Team
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
Collectively, your validation panel must have:
Vocational competencies and current industry skills that relate to the unit being validated
Up-to-date knowledge and skills in vocational teaching and learning
Any one of these training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its successor
Assessment validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.
While ASQA does not have a recommended or required template for assessment tool validation, many templates are available online. These tools generally require validators to review the tools as a whole to see if they meet the principles of assessment.
Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
We recommend using a more detailed template to examine each unit requirement and the assessment items that correspond to them. Here is an example:
Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Look For?
As mentioned in our blog post Common Problems In Assessment Tools, it’s crucial that your assessment tools enable trainers to follow assessment principles and evidence rules.
Key Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?
Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?
Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?
Evidence Core Rules
Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool prove that the work is the candidate’s own?
Currency – Do the assessment tools correspond to current units of competency and industry practices?
Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To prevent using learning resources that do not address some unit requirements, ensure you adhere to these guidelines:
Demonstrate What You Teach
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
diapering
prepare bottle, bottle feed babies and clean equipment
prepare solids and feed infants
respond to infant signs and cues appropriately
settle babies for sleep and prepare them
monitor and support physical exploration and gross motor skills appropriate for the age
Having students explain the process of nappy changing for babies under 12 months old doesn’t fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Complete or Not Competent
Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information can be included in a work package?
The answer could include:
Necessary materials
Relevant costs
Length of activities
Specified roles and responsibilities
If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:
Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Possible answers can include, but are not limited to:
Weather conditions – isolating the work area, engineering, personal protective equipment
Work area and ground conditions – elimination, isolation, engineering
People – isolating, use of engineering controls, administration
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolation, use of engineering controls, administrative controls
Equipment or machinery click here – isolation, engineering controls, administration
Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.